Kemppi Evo 170 User Manual download pdf (Page 5)

1. PREFACE

1.1 General

Congratulations on choosing MinarcMig Evo welding equipment. Used correctly, Kemppi

p°roducts can signicantly increase the productivity of your welding, and provide years of

economical service.

This operating manual contains important information on the use, maintenance and safety of

your Kemppi product. The technical specications of the equipment can be found at the end

of the manual.

Please read the manual carefully before using the equipment for the rst time. For your

own safety and that of your working environment, pay particular attention to the safety

instructions in the manual.

For more information on Kemppi products, contact Kemppi Oy, consult an authorised Kemppi

dealer, or visit the Kemppi web site at www.kemppi.com.

For Kemppi’s standard safety instructions and warranty terms and conditions, please visit our

web site at www.kemppi.com.

The specications presented in this manual are subject to change without prior notice.

NOTE! Items in the manual that require particular attention in order to minimise damage and

personal harm are indicated with this symbol. Read these sections carefully and follow their

instructions.

Disclaimer

While every eort has been made to ensure that the information contained in this guide

is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi

reserves the right to change the specication of the product described at any time without

prior notice. Do not copy, record, reproduce or transmit the contents of this guide without

prior permission from Kemppi.

1.2 Product introduction

MinarcMig Evo 170 and 200 are easy-to-use MIG/MAG welding machines suitable for

professional industry, site and repair welding. Before use or doing any maintenance work on

the machine, read the operating manual and keep it for further reference.

MinarcMig Evo tolerates input voltage uctuation and is suitable for work on sites using

power generators and use with long power cables. The power source utilises PFC technology,

ensuring optimum usage on single phase power supplies. The IGBT inverter design delivers

reliable arc ignition and welding performance, with all ller wire types.

Welding and earth return cables are supplied in the delivery package, including gun, earth

clamp and connections.

1.2.1 Properties

The welding machine is small, ecient and light. It is easy to carry with the handle or shoulder

strap. It is suitable for a wide range of welding applications, and the possibility to use long

power extension cables makes it easy to use in worksite conditions. It is also suitable for use

with power generators.

The MinarcMig Evo 170 is set manually, with separate control for wire feed speed and voltage.

MinarcMig Evo 200 machine has both an automatic and manual operation mode. In the

automatic mode, you must rst select the ller wire material after which the welding voltage

and wire feed speed can be adjusted with one control knob, according to the thickness of

the sheet to be welded. Thus, selecting the right parameters is easy. In automatic mode, the

length of the arc, or welding heat, is trimmed with another control. In manual mode, the

welding voltage and wire feed speed are adjusted separately with their own controls. The

use of the machine is aided with an LCD display which indicates the welding current, welding

voltage and wire feed speed.

1 2 3 4 5 6 7 8 9 10 ... 25 26

Comments to this Manuals

No comments

Kemppi Evo 170 User Manual Page 5

Comments to this Manuals

Related products and manuals for Equipment Kemppi Evo 170