Kemppi Evo 170 User Manual

Operating manualKäyttöohjeBruksanvisningBruksanvisning BrugsanvisningGebrauchsanweisungGebruiksaanwijzingManuel d’utilisationManual de instruccionesIn

EN2.7 Filler wireThe machine is delivered with the welding gun connected to the positive pole (+) making it suitable for welding with solid steel, st

EN2.7.2 Loading and threading the ller wire 1., 10.1. Open the ller wire cabinet door by pressing the orange door latch button and insta

EN 5., 8.7.9.6. Open the pressure control arm which then opens the feed mechanism.7. Thread the ller wire through the wire guide to the w

EN2.8 Controls and indicator lightsMinarcMig Evo 170 control panelUW0060951. 2. 3. 4. 5. 6. 1. Wire feed speed control2. Welding voltage control3

ENMinarcMig Evo 200 control panelSU1.7.2.3. 4.5.6.Machine's control panel in automatic mode1. Welding power control (automatic mode) OR Wire fee

EN2.8.1 Display in automatic mode1.2.4.5.7.6.3.Machine display in automatic mode1. Material thickness2. Visual material thickness and weld shape in

EN2.8.3 Arc length trimmer in automatic modeThe arc length/weld shape/voltage trimmer adjusts the length of the arc, either shorter or longer, and a

ENArc dynamics In Manual mode you can select from two dierent arc dynamics settings. Press Manual mode button (Arc Dynamics control on MinarcMig 1

ENHaving checked that the MinarcMig Evo is prepared in the correct way for the welding task ahead, and that you are wearing the necessary protective e

EN2.10 Using the shoulder strap1.3.2.4.Using and xing the shoulder strapThe machine is delivered with a fabric shoulder strap and metal clip set. Th

EN3.2 Maintenance of the wire feed mechanismParts of the welding gun and wire liner12789 3 4 5 61 9580101 10, 112 95910103 98766340.6 mm4 98766350

EN5. Tighten the wire guide in place with the mounting nut.6. Cut the wire guide 2 mm from the mounting nut and le the sharp edges of the cut round

EN4. ORDERING NUMBERSMinarcMig Evo 170includes gun, cables, gas hose and shoulder strap 61008170MinarcMig Evo 170 AUincludes gun, cables, gas hose an

EN5. TECHNICAL DATAMinarcMig Evo 170Connection voltage1 ~ 50/60 Hz 230 V ± 15 %Connection voltage (AU)1 ~ 50/60 Hz 240 V ± 15 %Rated power at max. cu

ENMinarcMig Evo 200Connection voltage1 ~ 50/60 Hz 230 V ± 15 %Connection voltage (AU)1 ~ 50/60 Hz 240 V ± 15 %Rated power at max. current35 % ED 200 A

www.kemppi.comKEMPPI OYKempinkatu 1PL 13FIN-15801 LAHTIFINLANDTel +358 3 899 11Telefax +358 3 899 [email protected] myynti:Te

ENOPERATING MANUALEnglish

ENCONTENTS1. Preface ...31.1 General ...

EN1. PREFACE1.1 GeneralCongratulations on choosing MinarcMig Evo welding equipment. Used correctly, Kemppi p°roducts can signicantly increase the p

ENYou can use steel (solid or cored wire), stainless steel, aluminium and CuSi as ller wire in the machine. The steel wire can be 0.6 mm, 0.8 mm, 0.9

EN2.2 Positioning and location of the machinePlace the machine on a rm, dry and level surface. Where possible, do not allow dust or other impurities

EN2.6 Cable connectionsConnection to the mainsThe machine is tted with a 3 m long supply voltage cable and plug. Connect the supply voltage cable to

ENShielding gasShielding gas is used for replacing air around the welding arc. For steel wires, use CO₂ (carbon dioxide) or a mixture of Ar (argon) an