Kemppi MinarcTig 180 User Manual

Käyttöohje • SuomiBruksanvisning • SvenskaBruksanvisning • NorskBruksanvisning • DanskOperation instructions • EnglishGebrauchsanweisung • DeutschGebr

© Kemppi Oy 0615MinarcTigTM 180 9 EN1.Connectthehosetothereducedpressuresideofthecylinderregulator,orowmeterand tighten the connecto

10 MinarcTigTM 180© Kemppi Oy 0615ENand also the correct welding current selection, to ensure the core electrode ller material and ux coating melt

© Kemppi Oy 0615MinarcTigTM 180 11 EN9. Digital welding current meter and parameter value display. Displays time or Amperes.10. Thermal temperature i

12 MinarcTigTM 180© Kemppi Oy 0615ENgas time elapses as set.HF or Contact ignition selectionThe TIG arc can be established with or without a

© Kemppi Oy 0615MinarcTigTM 180 13 EN4.2. Machine disposalDo not dispose of electrical equipment together with normal waste! In observance of Europea

14 MinarcTigTM 180© Kemppi Oy 0615EN5. TROUBLESHOOTINGProblem CauseMain switch indicator light does not switch onThe machine has no supply voltage• C

© Kemppi Oy 0615MinarcTigTM 180 15 EN6. TECHNICAL DATAThe machine complies with the CE mark standards.MinarTigTM 180Mains voltage 1 ~ 230 V ±15%, 50/

16 MinarcTigTM 180© Kemppi Oy 0615EN7. TERMS OF GUARANTEEKemppi Oy provides a guarantee for products manufactured and sold by them if defects in manu

KEMPPI DANMARK A/S Literbuen 11 DK – 2740 SKOVLUNDE DANMARK Tel 44 941 677 Telefax 44 941 536 e-mail: [email protected] KEMPPI FRANCE S.A.S65 Avenue

© Kemppi Oy 0615MinarcTigTM 180 1 ENOPERATION INSTRUCTIONSENGLISH

2 MinarcTigTM 180© Kemppi Oy 0615ENCONTENTS1. INTRODUCTION ...31.1. Gen

© Kemppi Oy 0615MinarcTigTM 180 3 EN1. INTRODUCTIONCongratulations on purchasing the Kemppi MinarcTigTM 180 TIG/MMA machine. MinarcTigTM 180

4 MinarcTigTM 180© Kemppi Oy 0615ENTIG weldingIn TIG welding, the welding arc is formed between a non-consumable tungsten electrode and the work piec

© Kemppi Oy 0615MinarcTigTM 180 5 ENDo not move the shielding gas cylinder when the reducing valve/regulator is connected and open. Always x the gas

6 MinarcTigTM 180© Kemppi Oy 0615EN3. MACHINE USE 3.1. Before commissioning machine MinarcTigTM is packed in purpose made, recyclable packaging. Ho

© Kemppi Oy 0615MinarcTigTM 180 7 EN3.2. General View of the machine1. Welding torch2. Earth return clamp3. On/off main switch (16 amp mains supply s

8 MinarcTigTM 180© Kemppi Oy 0615ENEarth return cableConnect the earth return cable to the negative pole when welding with an MMA electrode. Connect